Load data for .30-30 Win. + .308 | 160gr | Hornady FTX L1.25

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 160gr \| Hornady FTX L1.25
Manufacturer SKU:	30396
Bullet Weight:	160gr \| 10.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.250" \| 31.7mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.777" \| 19.7mm
Shank Seated Depth:	0.617" \| 15.7mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B2678_C328
Last updated:	2025-02-02
Recommended Twist Rate:	1:12 - 1:10

Load data for 74 loads in caliber .30-30 Win. with .308 | 160gr | Hornady FTX L1.25 bullet and 37 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
Muzzle velocity vs. barrel length
Every 1 inch additional barrel length increases muzzle velocity by approx. 18.9 fps
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41655	90%	**69	100%
ADI AR 2219	<<locked>>	92%	40901	88%	**92	97%
Accurate 2015	<<locked>>	97%	39233	85%	**52	98%
[Accurate 2460]*	<<locked>>	96%	40480	87%	**69	94%
Accurate 2495	<<locked>>	97%	30124	65%	**87	96%
[Accurate 2520]*	<<locked>>	96%	33330	72%	**93	92%
Alliant AR-Comp 👍	<<locked>>	97%	34969	75%	**39	99%
Alliant Reloder-10x 👍	<<locked>>	95%	40741	88%	**85	99%
Alliant Reloder-7	<<locked>>	87%	40756	88%	**23	99%
Baschieri & Pellagri 106	<<locked>>	91%	41017	88%	**03	97%
[Hodgdon Benchmark]*	<<locked>>	97%	41162	89%	**26	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	41640	90%	**90	92%
Hodgdon H322	<<locked>>	97%	40030	86%	**75	97%
Hodgdon H335	<<locked>>	93%	41176	89%	**98	96%
Hodgdon H4198	<<locked>>	88%	40872	88%	**90	96%
[IMR 3031]*	<<locked>>	96%	29617	64%	**21	93%
IMR 4198 👍	<<locked>>	92%	40886	88%	**36	100%
[Lovex D073.4]*	<<locked>>	94%	40915	88%	**59	94%
[Lovex D073.5]*	<<locked>>	96%	40480	87%	**69	94%
Norma 200 👍	<<locked>>	90%	40292	87%	**65	100%
[Norma 202]*	<<locked>>	96%	33112	71%	**64	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	40712	88%	**69	94%
[Rottweil R 901]*	<<locked>>	97%	37188	80%	**13	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40857	88%	**49	100%
SNPE Vectan SP 10	<<locked>>	92%	41495	89%	**01	96%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36593	79%	**44	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	29559	64%	**19	92%
[Somchem S321]*	<<locked>>	96%	39102	84%	**62	92%
Somchem S335	<<locked>>	97%	35650	77%	**57	95%
Vihtavuori N120	<<locked>>	91%	40727	88%	**16	100%
Vihtavuori N130	<<locked>>	96%	40466	87%	**26	99%
Vihtavuori N133	<<locked>>	96%	33591	72%	**18	96%
[Vihtavuori N135]*	<<locked>>	97%	24976	54%	**86	92%
[Vihtavuori N140]*	<<locked>>	97%	31807	69%	**11	93%
[Vihtavuori N530]*	<<locked>>	96%	39262	85%	**49	92%
[Vihtavuori N540]*	<<locked>>	97%	31647	68%	**31	92%
[Winchester 748]*	<<locked>>	96%	38856	84%	**69	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32285	70%	**21	100%
[ADI AR 2219]*	<<locked>>	81%	29022	63%	**62	92%
[Accurate 2015]*	<<locked>>	81%	23801	51%	**47	93%
[Accurate 2460]*	<<locked>>	89%	31807	69%	**21	90%
[Accurate 2495]*	<<locked>>	85%	19928	43%	**31	90%
[Accurate 2520]*	<<locked>>	93%	30211	65%	**28	91%
[Alliant AR-Comp]*	<<locked>>	81%	21741	47%	**14	93%
Alliant Reloder-10x	<<locked>>	81%	26527	57%	**19	95%
Alliant Reloder-7	<<locked>>	81%	34055	73%	**18	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29791	64%	**09	94%
[Hodgdon Benchmark]*	<<locked>>	90%	33895	73%	**98	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	36390	78%	**05	90%
[Hodgdon H322]*	<<locked>>	82%	25744	55%	**80	90%
[Hodgdon H335]*	<<locked>>	82%	28747	62%	**59	91%
[Hodgdon H4198]*	<<locked>>	81%	33315	72%	**59	94%
[IMR 3031]*	<<locked>>	90%	25005	54%	**06	91%
IMR 4198	<<locked>>	81%	29805	64%	**36	97%
[Lovex D073.4]*	<<locked>>	87%	31763	68%	**05	90%
[Lovex D073.5]*	<<locked>>	89%	31807	69%	**21	90%
Norma 200	<<locked>>	81%	30385	65%	**91	98%
[Norma 202]*	<<locked>>	91%	27891	60%	**52	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	30937	67%	**91	90%
[Rottweil R 901]*	<<locked>>	86%	27746	60%	**19	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36622	79%	**93	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28631	62%	**59	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	27499	59%	**70	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	25846	56%	**34	90%
[Somchem S321]*	<<locked>>	92%	34142	74%	**73	90%
[Somchem S335]*	<<locked>>	86%	25498	55%	**47	90%
Vihtavuori N120	<<locked>>	81%	30501	66%	**55	100%
Vihtavuori N130	<<locked>>	81%	25643	55%	**50	95%
[Vihtavuori N133]*	<<locked>>	82%	22408	48%	**59	91%
[Vihtavuori N135]*	<<locked>>	94%	23322	50%	**44	90%
[Vihtavuori N140]*	<<locked>>	92%	27717	60%	**19	90%
[Vihtavuori N530]*	<<locked>>	93%	35273	76%	**77	90%
[Vihtavuori N540]*	<<locked>>	94%	28601	62%	**65	90%
[Winchester 748]*	<<locked>>	92%	33953	73%	**77	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data